Panasonic BL-C30 CMOS Pan/Tilt IP camera wireless with memory

Code: 000308

Description: Panasonic BL-C30 CMOS Pan/Tilt IP camera wireless with memory
BL-C30A panasonic Pan/Tilt Wireless 802.11b/g Network Camera
See There When You Can't Be There™
These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1. Place them in your home, office, vacation home or almost anywhere else that you'd like to keep an eye on things, with no PC required on location!. They are easy to install and operate and require no additional software for the PC that you're viewing them on. Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.
รหัสสินค้า : BL-C30
BL-C30A panasonic Pan/Tilt Wireless 802.11b/g Network Camera
See There When You Can't Be There™
These cameras can be viewed and controlled from a standard Web browser, video display, or even a compatible cell phone or PDA1. Place them in your home, office, vacation home or almost anywhere else that you'd like to keep an eye on things, with no PC required on location!. They are easy to install and operate and require no additional software for the PC that you're viewing them on. Each camera also comes with a free Web address, which can track the camera automatically. All you need is a regular Web browser to view them on your PC, as all of the other required software, including control software (TCP/UDP) and e-mail software (SMTP), is already inside the camera.

802.11b/g Wireless Communication
This camera can communicate wirelessly with standard 802.11b or 802.11g wireless devices, allowing the flexibility to install and operate the camera without running network wires, and utilizing SSID filtering and powerful 40/64/128 bit WEP encryption helps to protect your wireless network from illegal intrusion.

Just Plug It In and Play
This network camera is truly easy to install and use in most cases. With industry standard automatic configuration (UPnP), the camera and your router or PC will automatically decide the best settings allowing you to access your camera without any complicated setup. Once connected, using a simple Web browser, just enter in your free, permanent Web address which comes with the camera and you can see and move the camera! It's that simple.

Control the Camera Remotely
Using a standard Web browser, video display, or even a compatible cell phone or PDA, you can control the movement of the camera. There is 120º of Pan (left & right) movement and 90º of Tilt (up & down) movement available. You can also assign a "Home Position" that allows you to return the camera to a pre-designated shooting position. Up to eight shooting positions can be registered in advance, so you can aim the camera exactly where you want it. You can also click on the part of the image you want to see, and automatically bring that part to the center of the screen.

When you need a little privacy
With the built in Privacy mode, your privacy is protected by simply pressing a button. An indicator on the front of the camera turns red, and you know at a glance that the camera is now only accessible by you2. The camera can also be set up to show a green light when the camera is being accessed.

Sensor Recording and Email Alerts
With the built-in heat sensor, the camera can be set to record and/or notify you by email when someone enters the room. It can even automatically move to a preset location when triggered, just in case someone was viewing a different part of the room

SERVER FEATURES: .
Wireless
Communication mode
(Communication Standard) IEEE 802.11b, 802.11b/g, 802.11g exclusive
Data Transfer Mode Direct Sequence Spectrum Spread (DS-SS),
Orthogonal Frequency Division Multiplexing (OFDM)
Frequency Range 2.412·.462 GHz
Channel 1-11
Security WEP (64/128/152 bit), SSID
Server

Video Compression JPEG (3 Levels)
Video Resolution 640 x 480, 320 x 240 (default), 160 x 120
Buffered Image About 250 frames (320 x 240) with time display
Frame rate (*1) Max. 7.5 frames/second (640 x 480)
Max. 15 frames/second (320 x 240 or 160 x 120)
Supported Protocols TCP, UDP, IP, HTTP, FTP, SMTP, DHCP, DNS, ARP, ICMP,
POP3, NTP, DDNS
Message Transfer Condition Pyroelectric Infrared Sensor or Timer
Image Transfer Method SMTP(*2), FTP
Network Camera

Pan/Tilt Angle Pan: -50° to +50°, Tilt: -40°to +10°
Number of Pixels 1/4-inch CMOS Sensor 320,000 pixels
Illumination 1(*3) - 10,000 lx
White Balance Auto/Manual/Hold
Focus Fixed 0.5 m (20 inches)-Infinity
Caliber Ratio (F No.) F2.8
Horizontal Viewing Angle 43°
Exposure Auto
Terminal

Interface 10Base-T/100Base-TX Ethernet RJ-45 connector x 1
Sensor
Sensor Detection Method Pyroelectric Infrared Sensor(*4)
Sensor Range Horizontally About 30°, Vertically About 85°, Distance
About 5 m (16.4 feet)
(When the temperature is 20°C [68°F])

General

Indicator Display Power/Network Communication/Camera operation/Ethernet link
Dimension (HWD) About 74 mm (2.91 inches) x About 98 mm (3.86inches)
x About 61 mm (2.40 inches)
Weight 170g (0.37 lb.) (Only the unit)
Power Supply AC adaptor: Input 120 V AC, 60 Hz
Output 9 V DC, 500 mA
Consumption: About 2.5 W (4 W during pan/tilt scan)
Temperature Operation: +5°C (+41°F) to +40°C (+104°F)
Storage: +0°C (+32°F) to +50°C (+122°F)
Humidity Operation: 20 % - 80 % (No Condensation)
Storage: 20 % - 90 % (No Condensation)



System Requirements
Operating System Windows® 98/SE
WindowsNT® 4.0
Windows® 2000
Windows® Me
Windows® XP
CPU Pentium® III (500 MHz or greater is recommended.)
Protocol TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
Interface 10/100 Mbps network card installed
Web browser Internet Explorer 6.0 or later
(Not included on the Setup CDROM)


Call 081 633 8242